Question No: 1 ( Marks: 1 ) - Please choose one
D Corporation uses process costing to calculate the cost of manufacturing Crunchies. During the month 12,500 units were completed, 1,500 units remained in work in process at 25 percent completed. How many equivalent units are produced?
► 12,500 units
► 12,875 units
► 14,250 units
► 12,125 units
Question No: 2 ( Marks: 1 ) - Please choose one
Greenwood petroleum has the data for the year was as follow:
Opening WIP 26,000 barrels.
Introduced during the year 67,000 barrels
Closing WIP 15,000 barrels.
How many barrels were completed and transferred out of work-in-process this period?
► 67,000 barrels
► 78,000 barrels
► 82,000 barrels
► 93,000 barrels
Question No: 3 ( Marks: 1 ) - Please choose one
During the year 50,000 units put in to process.30, 000 units were completed. Closing WIP were 20,000 units, 70% completed. How much the equivalent units of output would be produced?
► 20,000 units
► 30,000 units
► 36,000 units
► 44,000 units
Question No: 4 ( Marks: 1 ) - Please choose one
What would be the effect on the cost of a department in case of normal Loss?
► Decreased
► Increased
► No effect
► Increase to the %age of loss
Question No: 5 ( Marks: 1 ) - Please choose one
When 10,000 ending units of work-in-process are 30% completed as to conversion, it means:
► 30% of the units are completed
► 70% of the units are completed
► Each unit has been completed to 70% of its final stage
► Each of the units is 30% completed
Question No: 6 ( Marks: 1 ) - Please choose one
In order to compute equivalent units of production, which of the following must be reasonably estimated?
► Units
► The percentage of completion
► Direct material cost
► Units started and completed
Question No: 7 ( Marks: 1 ) - Please choose one
In a job order cost system, the use of direct materials would be recorded as a debit to:
► Finished Goods inventory
► Manufacturing Overhead
► Raw Materials inventory
► Work in Process inventory
Question No: 8 ( Marks: 1 ) - Please choose one
If management predicts total direct labor costs of Rs. 100,000 and total overhead costs of Rs. 200,000, what is its predetermined overhead rate based on direct labor costs?
► 50%
► 100%
► 200%
► Cannot be determined
Question No: 9 ( Marks: 1 ) - Please choose one
P Ltd applied overheads on the basis of direct labor hours. The overhead applied rate for the period has been based on budgeted overhead of Rs.150, 000 and 50,000 direct labor hours. During the period overhead of Rs. 180,000 were incurred and 60,000 direct labor hours were used.
Which of the following statement is correct?
► Overhead was Rs.30,000 over applied
► Overhead was Rs.30,000 under applied
► No under or over applied occurred
► None of the given
Question No: 10 ( Marks: 1 ) - Please choose one
Raymond Corporation estimates factory overhead of Rs. 345,000 for next fiscal year. It is estimated that 60,000 units will be produced at a material cost of Rs. 575,000. Conversion will require 34,500 direct labor hours at a cost of Rs. 10 per hour, with 25,875 machine hours.
FOH rate on the bases of Prime cost would be?
► Rs. 37.5 per unit
► Rs. 56.6 per unit
► Rs. 60 per unit
► Rs.1 per unit
Question No: 11 ( Marks: 1 ) - Please choose one
Nelson Company has following FOH detail.
Budgeted (Rs.) Actual (Rs.)
Production Fixed overheads 36,000 39,000
Production Variable overheads 9,000 12,000
Direct labor hours 18,000 20,000
What would be the amount of under/over applied FOH
► Under applied by Rs.1,000
► Over applied by Rs.1,000
► Under applied by Rs.11,000
► Over applied by Rs.38,000
Question No: 12 ( Marks: 1 ) - Please choose one
Which of the following is TRUE regarding the use of blanket rate?
► The use of a single blanket rate makes the apportionment of overhead costs unnecessary
► The use of a single blanket rate makes the apportionment of overhead costs necessary
► The use of a single blanket rate makes the apportionment of overhead costs uniform
► None of the given options
Question No: 13 ( Marks: 1 ) - Please choose one
A Blanket Rate is:
► A single rates which used throughout the organisation departments
► A double rates which used throughout the organisation departments
► A single rates which used in different departments of the organisation.
► None of the Given
Question No: 14 ( Marks: 1 ) - Please choose one
It is possible for an item of overhead expenditure to be shared amongst many departments. It is also possible that this same item may relate to just one specific department.
If the item was not charged specifically to a single department this would be an example of:
► Apportionment
► Allocation
► Re-apportionment
► Absorption
Question No: 15 ( Marks: 1 ) - Please choose one
FOH absorption rate is calculated by the way of:
► Estimated FOH Cost/Direct labor hours
► Estimated FOH Cost/Direct labor cost
► Estimated FOH Cost/Machine hours
► All of the given options
Question No: 16 ( Marks: 1 ) - Please choose one
Which of the following is / are time based incentive wage plan?
► Hasley Premium Plan
► Hasley Weir Premium Plan
► Rowan Premium Plan
► All of the given options
Question No: 17 ( Marks: 1 ) - Please choose one
If, Basic Salary Rs.10,000
Per Piece commission Rs. 5
Unit sold 700 pieces
What will be the total Salary?
► Rs. 3,500
► Rs. 13,500
► Rs. 10,000
► Rs. 6,500
Question No: 18 ( Marks: 1 ) - Please choose one
Payroll includes:
► Salaries & Wages of direct labor
► Salaries & Wages of Indirect labor
► Salaries & Wages of Administrative
► Salaries & Wages of direct labor, Indirect labor, and Administrative
Question No: 19 ( Marks: 1 ) - Please choose one
Which of the following document evidences the transaction of purchase of material?
► Material requisition
► Store requisition
► Purchase order
► Purchase invoice
Question No: 20 ( Marks: 1 ) - Please choose one
Which of the following is NOT an assumption of the basic economic-order quantity model?
► Annual demand is known
► Ordering cost is known
► Carrying cost is known
► Quantity discounts are available
Question No: 21 ( Marks: 1 ) - Please choose one
A store sells five cases of soda each day. Ordering costs are Rs. 8 per order, and soda costs Rs. 3 per case. Orders arrive four days from the time they are placed. Daily holding costs are equal to 5% of the cost of the soda. What is the EOQ for soda?
► 4 cases
► 8 cases
► 10 cases
► 23 cases
Question No: 22 ( Marks: 1 ) - Please choose one
All of the following are deducted from Gross Profit to calculate Operating income EXCEPT:
► Selling expenses
► Advertising expenses
► Administrative expenses
► Financial expenses
Question No: 23 ( Marks: 1 ) - Please choose one
Which of the following is CORRECT to calculate cost of goods manufactured?
► Direct labor costs plus total manufacturing costs
► The beginning work in process inventory plus total manufacturing costs and subtract the ending work in process inventory
► Beginning raw materials inventory plus direct labor plus factory overhead
► Conversion costs and work in process inventory adjustments results in cost of goods manufactured
Question No: 24 ( Marks: 1 ) - Please choose one
Which of the following is a period cost?
► Direct materials
► Indirect materials
► Factory utilities
► Administrative expenses
Question No: 25 ( Marks: 1 ) - Please choose one
The salary of factory clerk is treated as:
► Direct labor cost
► Indirect labor cost
► Conversion cost
► Prime cost
Question No: 26 ( Marks: 1 ) - Please choose one
The components of the conversion cost are:
► Direct Material + Direct Labor + Other Direct Cost
► Direct Labor + FOH
► Prime Cost + FOH+ Other Direct Cost
► Prime Cost + FOH
Question No: 27 ( Marks: 1 ) - Please choose one
The cost of Telephone bill of the factory is treated as:
► Fixed cost
► Variable cost
► Step cost
► Semi variable cost
Question No: 28 ( Marks: 1 ) - Please choose one
Which of the following is a cost that changes in proportion to changes in volume?
► Fixed cost
► Sunk cost
► Opportunity cost
► None of the given options
Question No: 29 ( Marks: 1 ) - Please choose one
Cost accounting concepts include all of the following EXCEPT:
► Planning
► Controlling
► Sharing
► Costing
Question No: 30 ( Marks: 1 ) - Please choose one
If a predetermined FOH rate is not applied and the volume of production is reduced from the planned capacity level, the cost per unit expected to:
► Remain unchanged for fixed cost and increased for variable cost
► Increase for fixed cost and remain unchanged for variable cost
► Increase for fixed cost and decreased for variable cost
► Decrease for both fixed and variable costs
Question No: 31 ( Marks: 1 ) - Please choose one
All of the following are characteristics of Group Bonus Scheme EXCEPT:
► A standard time is set for the completion of a job
► If the time taken is greater than the time allowed, the workers in the group receive time wages
► If the time taken is less than the time allowed, the group receives a bonus on time saved
► If the time taken is greater than the time allowed, the workers in the group receive time deductions for extra hours
Question No: 32 ( Marks: 1 ) - Please choose one
Which of the following is TRUE when piece rate system is used for wage determination?
► Under this method of remuneration a worker is paid on the basis of time taken by him to perform the work
► Under this method of remuneration a worker is paid on the basis of production
► The rate is expressed in terms of certain sum of money for total production
► The rate is not expressed in terms of certain sum of money for total production
Question No: 33 ( Marks: 1 ) - Please choose one
Under Halsey premium plan, if the employee completes his job in less than the standard time fixed for the job, he is given:
► Only wages for the actual hours taken
► Wages for the actual hours taken plus bonus equal to one half of the wage of the time saved
► Wages for the actual hours taken plus bonus equal to one third of the wage of the time saved
► Only the bonus equal to one half of the time saved
Question No: 34 ( Marks: 1 ) - Please choose one
Which of the following is NOT a reason for carrying inventory?
► To maintain independence of operations
► To take advantage of economic purchase-order size
► To make the system less productive
► To meet variation in product demand
Question No: 35 ( Marks: 1 ) - Please choose one
Restocking of stores, in order to ensure efficient functioning of the stores department and steady flow of materials to the production departments, is duty of:
► Managers
► Storekeeper
► Production In charge
► Sales supervisor
Question No: 36 ( Marks: 1 ) - Please choose one
You made Rs. 10,000 loan to your cousin's company. At the end of one year, the company returned to you Rs. 10,850. The Rs. 850 is called which one of the following?
► Increases in loan
► Increases in dividends
► An 8.5% return on investment
► All of the given options
Question No: 37 ( Marks: 1 ) - Please choose one
The net sales of the business totals Rs. 200,000 and the Cost of Goods Sold for the same period totals Rs.146,000. What is the gross margin ratio?
► 0.22
► 0.25
► 0.27
► 0.33
Question No: 38 ( Marks: 1 ) - Please choose one
If, Gross profit = Rs. 40,000
GP Margin = 25% of sales
What will be the value of cost of goods sold?
► Rs. 160,000
► Rs. 120,000
► Rs. 40,000
► Can not be determined
Question No: 39 ( Marks: 1 ) - Please choose one
Cost accountants are concerned about the ratios relating to the Profits and Manufacturing costs. These ratios might include:
► Gross Mark up rate
► Inventory turnover ratio
► Cost of goods sold to sales ratio
► All of the given options
Question No: 40 ( Marks: 1 ) - Please choose one
The total cost to produce one unit is Rs. 600. Direct materials are 20% of the total cost and direct labor is 1/3 of the combined total of direct labor and direct materials. What was the cost for direct materials, direct labor, and factory overhead?
► Rs. 420, Rs. 60 and Rs. 120, respectively
► Rs. 60, Rs. 120 and Rs. 420, respectively
► Rs. 120, Rs. 60 and Rs. 420, respectively
► Rs 60, Rs. 420 and Rs. 120, respectively
Question No: 41 ( Marks: 10 )
CK Products Limited purchased materials of Rs. 550,000 and incurred direct labor of Rs. 420,000 during the year ended June 30, 2006. Factory overheads for the year were Rs.380,000. The inventory balances are as follows:
July 1, 2005 June 30, 2006
Rupees Rupees
Finished goods 90,000 105,000
Work in process 121,000 110,000
Materials 100,000 105,000
Required:
1) Cost Of Goods Manufactured Statement.
2) Cost Of Goods Sold Statement.
